The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. In the applied principle that corresponds to the standard VDI 3491-15, particles are removed from the sample according to the specified dilution ratio – the particle size distribution remains unchanged.
Optical particle counters show a maximum measurable aerosol concentration due to their operating principle. If this limit is exceeded major errors cannot be excluded, for example because of coincidence. In case of clean room testing or laminar flow box testing according to VDI 2083 measurements of high upstream concentrations are required. Conventional clean room particle counters are unable to measure at such high concentrations.
By placing the dynamic dilutor DDS 560 before a particle measuring device, e.g. the LAP 322: Laser Aerosol Particle Size Spectrometer, the aerosol concentration can be reduced by a factor selected by the user. Thus, the required upstream concentration can be diluted to a concentration which is within the measuring range of the particle counting device.
Advantages:
The device is easy and safe to operate. The power supply can either be from the mains or from a battery. Thus, it is flexible to use and can be utilised in combination with different particle counters.
The dilution system is applicable for volume flows from 0.4l/min to 3l/min. The range of adjustment of the dilution ratio depends on the current total volume flow. For example, for a volume flow of 1l/min dilution factors from 10 to 370 can be adjusted.
Applications:
Adaptive Instruments
Unit 4 Franklyn House,
Daux Road, Billingshurst,
West Sussex,
RH14 9SJ, UK
Tel: +44 1403 753333
Fax: +44 1403 753386
